TDB-10A
≤ 10 LSmall accumulator-head extrusion blow molding for products up to 10 L, with a 2 L accumulator head and a stationary mold.
- Stations
- Single
- Clamping
- 110 kN
- Power
- 63.2 kW
Manufacture better extrusion blow moulding machines for you.
Machine series
Accumulator-head machines for drums, IBC tanks, large panels and water tanks.
Accumulator-head machines for drums, IBC tanks, large panels and water tanks. 15 models · 10–3000 L
Small accumulator-head extrusion blow molding for products up to 10 L, with a 2 L accumulator head and a stationary mold.
Accumulator-head extrusion blow molding for products up to 25 L, with a 4 L accumulator head and a stationary mold.
Accumulator-head extrusion blow molding for 20–50 L products, with bottom blowing and a servo motor.
Accumulator-head extrusion blow molding for 50–80 L products, with bottom blowing and a servo motor.
Accumulator-head extrusion blow molding for 80–120 L products, with bottom blowing and a servo motor.
Accumulator-head extrusion blow molding for 120–160 L drums and large containers, with an 18 L accumulator head.
Accumulator-head extrusion blow molding for 120–160 L products, with bottom blowing, servo drive and a larger platen configuration.
Blow molding for 200–220 L single-ring, double-ring and open-top drums, with a single-layer servo configuration for this model.
Accumulator-head extrusion blow molding for water tanks and storage tanks up to 1,000 L, with a 50 L accumulator head and a 120 mm extruder.
Accumulator-head extrusion blow molding for large hollow panels and parts, with a 35 L accumulator head, a 135 mm extruder and 1,000 kN clamping force.
A dedicated accumulator-head blow molding machine for 1,000 L IBC tank bottles, with two 120 mm extruders, a 45 L accumulator head and a three-platen, dual-tie-bar clamping unit.
Accumulator-head extrusion blow molding for tall hollow panels and large parts, with a 35 L accumulator head, a 1,200 × 1,850 mm mold envelope and 1,200 kN clamping force.
Accumulator-head extrusion blow molding for water tanks and storage tanks up to 2,000 L, with an 80 L accumulator head and a 135 mm extruder.
The largest TDBX panel machine: a 70 L accumulator head, a 150 mm extruder, 2,000 kN clamping force and a 1,400 × 2,000 mm mold envelope.
Accumulator-head extrusion blow molding for storage tanks up to 3,000 L, with a 120 L accumulator head fed by three 100 mm extruders.
Side by side
Core figures transcribed from each machine's original specification sheet. Final configuration depends on your product, material and mold.
| Model | Stations | Max. volume | Clamping force | Screw diameter | Total power | Max. mold size (W × H) | Machine weight |
|---|---|---|---|---|---|---|---|
| TDB-10A | Single | 10 L | 110 kN | 70 mm | 63.2 kW | 480 × 530 mm | 5,000 kg |
| TDB-25A | Single | 25 L | 215 kN | 80 mm | 91.7 kW | 550 × 650 mm | 11,000 kg |
| TDB-50F | Single | 50 L | 260 kN | 90 mm | 103.9 kW | 700 × 950 mm | 14,000 kg |
| TDB-80F | Single | 80 L | 440 kN | 100 mm | 131.5 kW | 800 × 1000 mm | 16,000 kg |
| TDB-120F | Single | 120 L | 740 kN | 100 mm | 131.5 kW | 900 × 1450 mm | 20,000 kg |
| TDB-160B | Single | 160 L | 740 kN | 100 mm | 176.5 kW | 900 × 1450 mm | 23,000 kg |
| TDB-160D | Single | 160 L | 740 kN | 120 mm | 215 kW | 1000 × 1900 mm | 26,000 kg |
| TDB-250F | Single | 250 L | 740 kN | 120 mm | 289.5 kW | 1100 × 1600 mm | 35,000 kg |
| TDBS-1000A | Single | 1000 L | 1,000 kN | 120 mm | 288 kW | — | 40,000 kg |
| TDBX-1000A | Single | 1000 L | 1,000 kN | 135 mm | 308 kW | 1400 × 1550 mm | 55,000 kg |
| TDB-1200A | Single | 1200 L | 1,500 kN | 120 × 2 mm | 554 kW | — | 68,000 kg |
| TDBX-1500A | Single | 1500 L | 1,200 kN | 135 mm | 308 kW | 1200 × 1850 mm | 60,000 kg |
| TDBS-2000A | Single | 2000 L | 1,800 kN | 135 mm | 343 kW | — | 45,000 kg |
| TDBX-2000A | Single | 2000 L | 2,000 kN | 150 mm | 400 kW | 1400 × 2000 mm | 70,000 kg |
| TDBS-3000A | Single | 3000 L | 2,200 kN | 100 × 3 mm | 451 kW | — | 60,000 kg |
Choosing a series
Start from the product you will make. Volume ranges are the stated maximum volumes of the models on this site.
| Series | Typical products | Extrusion | Stations | Drive | Volume range | Models |
|---|---|---|---|---|---|---|
| HS Series | Bottles, jerry cans and stackable containers | Continuous extrusion | Single / Double | Hydraulic servo, toggle clamping; fully electric HSE models | 2–30 L | 17 |
| HTS Series | Bottles, milk bottles and jerry cans | Continuous extrusion | Double / Single | Hydraulic | 1–30 L | 11 |
| HT Series | Small bottles, jerry cans and stackable containers | Continuous extrusion | Double / Single | Hydraulic; servo optional | 0.6–50 L | 13 |
| TDB Series | Drums, IBC tanks, large panels and water tanks | Accumulator head, bottom blowing | Single | Hydraulic with servo motor | 10–3000 L | 15 |
| Special-purpose machines | 5 gallon PC water bottles, large panels, 5 L daily-chemical bottles | Dedicated configurations | Double / Single | Per model | 5–350 L | 5 |
A double-station machine alternates two molds under one extrusion head, so it suits higher output. A single-station machine suits lower volumes, larger molds and simpler projects. Decide from the accepted parts per hour you need.
Continuous extrusion suits bottles, jerry cans and containers up to about 30 L at short cycles. An accumulator head stores melt and pushes out a heavy parison quickly, which suits drums and large parts.
More detail: machine selection guide · catalogue and datasheets (PDF)
The TDB range includes bottom-blow accumulator-head machines for drums and large containers, the TDB-1200A for 1,000 L IBC tanks, TDBX machines for pallets and large panels, and TDBS machines for water tanks up to 3,000 L. Compare the accumulator, platen opening, mold envelope and product weight alongside the stated volume.
The stated maximum volume helps narrow the range. Check product weight, mold dimensions, station arrangement, head configuration and required output before making a selection.
Let's build your next production line
Share your container, material and production requirements. We’ll help you identify a suitable machine configuration.
Discuss your project