EH950AII
≤ 5 LDouble-station extrusion blow molding for 5 L daily-chemical bottles, with three die heads per station, on a split-type frame.
- Stations
- Double
- Clamping
- 350 kN
- Power
- 197.5 kW
Manufacture better extrusion blow moulding machines for you.
Machine series
PC water bottles and large-panel applications.
PC water bottles and large-panel applications. 5 models · 5–350 L
Double-station extrusion blow molding for 5 L daily-chemical bottles, with three die heads per station, on a split-type frame.
A dedicated blow molding machine for 3–5 gallon water bottles, with PC and Tritan configurations available in the product range.
Tie-bar-less accumulator-head extrusion blow molding for large panels and tall hollow products, with an 18 L accumulator head.
Extrusion blow molding for large panels and tall, thin hollow products, with independent mold-locking cylinders.
The largest tie-bar-less TDW machine: a 35 L accumulator head, 1,800 kN clamping force and a 1,600 × 1,900 mm mold envelope.
Side by side
Core figures transcribed from each machine's original specification sheet. Final configuration depends on your product, material and mold.
| Model | Stations | Max. volume | Clamping force | Screw diameter | Total power | Max. mold size (W × H) | Machine weight |
|---|---|---|---|---|---|---|---|
| EH950AII | Double | 5 L | 350 kN | 120 mm | 197.5 kW | 940 × 400 mm | 32,000 kg |
| TDB-25APC | Single | 25 L | 215 kN | 82 mm | 105 kW | 550 × 650 mm | 12,000 kg |
| TDW-160B | Single | 160 L | 660 kN | 100 mm | 179.5 kW | 1100 × 1400 mm | 22,000 kg |
| TDW-160E | Single | 160 L | 1200 kN | 120 mm | 215 kW | 1200 × 1900 mm | 22,000 kg |
| TDW-350A | Single | 350 L | 1,800 kN | 120 mm | 272.5 kW | 1600 × 1900 mm | 45,000 kg |
Choosing a series
Start from the product you will make. Volume ranges are the stated maximum volumes of the models on this site.
| Series | Typical products | Extrusion | Stations | Drive | Volume range | Models |
|---|---|---|---|---|---|---|
| HS Series | Bottles, jerry cans and stackable containers | Continuous extrusion | Single / Double | Hydraulic servo, toggle clamping; fully electric HSE models | 2–30 L | 17 |
| HTS Series | Bottles, milk bottles and jerry cans | Continuous extrusion | Double / Single | Hydraulic | 1–30 L | 11 |
| HT Series | Small bottles, jerry cans and stackable containers | Continuous extrusion | Double / Single | Hydraulic; servo optional | 0.6–50 L | 13 |
| TDB Series | Drums, IBC tanks, large panels and water tanks | Accumulator head, bottom blowing | Single | Hydraulic with servo motor | 10–3000 L | 15 |
| Special-purpose machines | 5 gallon PC water bottles, large panels, 5 L daily-chemical bottles | Dedicated configurations | Double / Single | Per model | 5–350 L | 5 |
A double-station machine alternates two molds under one extrusion head, so it suits higher output. A single-station machine suits lower volumes, larger molds and simpler projects. Decide from the accepted parts per hour you need.
Continuous extrusion suits bottles, jerry cans and containers up to about 30 L at short cycles. An accumulator head stores melt and pushes out a heavy parison quickly, which suits drums and large parts.
More detail: machine selection guide · catalogue and datasheets (PDF)
Explore dedicated configurations for PC water bottles and large hollow panels. Share your resin grade, product drawing and production requirements so the machine and mold can be assessed together.
The stated maximum volume helps narrow the range. Check product weight, mold dimensions, station arrangement, head configuration and required output before making a selection.
Let's build your next production line
Share your container, material and production requirements. We’ll help you identify a suitable machine configuration.
Discuss your project