HTSII-8L
≤ 1 LDouble-station extrusion blow molding with eight die heads per station for bottles up to 1 L, on a split-type frame.
- Stations
- Double
- Clamping
- 200 kN
- Power
- 165 kW
Manufacture better extrusion blow moulding machines for you.
Machine series
Bottle and container production with deflashing configurations.
Bottle and container production with deflashing configurations. 11 models · 1–30 L
Double-station extrusion blow molding with eight die heads per station for bottles up to 1 L, on a split-type frame.
Single-station extrusion blow molding for small bottles.
Double-station extrusion blow molding for small bottles.
Double-station blow molding for milk bottles and other small bottles, with four- or six-head configurations available in the product range.
Single-station extrusion blow molding for jerry cans and smaller bottles with multi-head options.
Double-station extrusion blow molding for jerry cans and smaller bottles with multi-head options.
Single-station extrusion blow molding for jerry cans and stackable containers.
Double-station extrusion blow molding for jerry cans and stackable containers.
Single-station extrusion blow molding for 20 L jerry cans and containers, with deflashing configurations.
Double-station extrusion blow molding for 20 L jerry cans and containers, with deflashing configurations.
Double-station extrusion blow molding for 20–30 L jerry cans and stackable containers, on a split-type frame.
Side by side
Core figures transcribed from each machine's original specification sheet. Final configuration depends on your product, material and mold.
| Model | Stations | Max. volume | Clamping force | Screw diameter | Total power | Max. mold size (W × H) | Machine weight |
|---|---|---|---|---|---|---|---|
| HTSII-8L | Double | 1 L | 200 kN | 100 mm | 165 kW | 890 × 330 mm | 25,000 kg |
| HTS-2L | Single | 2 L | 44 kN | 50 mm | 30.5 kW | 360 × 320 mm | 4,000 kg |
| HTSII-2L | Double | 2 L | 44 kN | 60 mm | 39 kW | 360 × 320 mm | 6,000 kg |
| HTSII-3L | Double | — | 70 kN | 80 mm | 72 kW | 490 × 250 mm | 8,000 kg |
| HTS-5L | Single | 5 L | 110 kN | 70 mm | 57.8 kW | 440 × 420 mm | 6,000 kg |
| HTSII-5L | Double | 5 L | 110 kN | 80 mm | 71.6 kW | 440 × 420 mm | 8,000 kg |
| HTS-12L | Single | 12 L | 158 kN | 80 mm | 73.1 kW | 540 × 500 mm | 8,000 kg |
| HTSII-12L | Double | 12 L | 158 kN | 90 mm | 78.5 kW | 540 × 500 mm | 12,000 kg |
| HTS-20L | Single | 20 L | 220 kN | 90 mm | 95.4 kW | 690 × 540 mm | 15,000 kg |
| HTSII-20L | Double | 20 L | 220 kN | 100 mm | 145 kW | 690 × 540 mm | 25,000 kg |
| HTSII-30L | Double | 30 L | 250 kN | 100 mm | 141 kW | 680 × 830 mm | 21,000 kg |
Choosing a series
Start from the product you will make. Volume ranges are the stated maximum volumes of the models on this site.
| Series | Typical products | Extrusion | Stations | Drive | Volume range | Models |
|---|---|---|---|---|---|---|
| HS Series | Bottles, jerry cans and stackable containers | Continuous extrusion | Single / Double | Hydraulic servo, toggle clamping; fully electric HSE models | 2–30 L | 17 |
| HTS Series | Bottles, milk bottles and jerry cans | Continuous extrusion | Double / Single | Hydraulic | 1–30 L | 11 |
| HT Series | Small bottles, jerry cans and stackable containers | Continuous extrusion | Double / Single | Hydraulic; servo optional | 0.6–50 L | 13 |
| TDB Series | Drums, IBC tanks, large panels and water tanks | Accumulator head, bottom blowing | Single | Hydraulic with servo motor | 10–3000 L | 15 |
| Special-purpose machines | 5 gallon PC water bottles, large panels, 5 L daily-chemical bottles | Dedicated configurations | Double / Single | Per model | 5–350 L | 5 |
A double-station machine alternates two molds under one extrusion head, so it suits higher output. A single-station machine suits lower volumes, larger molds and simpler projects. Decide from the accepted parts per hour you need.
Continuous extrusion suits bottles, jerry cans and containers up to about 30 L at short cycles. An accumulator head stores melt and pushes out a heavy parison quickly, which suits drums and large parts.
More detail: machine selection guide · catalogue and datasheets (PDF)
The HTS range includes single- and double-station machines, and multi-head milk bottle configurations. Review the neck finish, mold layout and deflashing method together; model selection depends on more than nominal bottle volume.
The stated maximum volume helps narrow the range. Check product weight, mold dimensions, station arrangement, head configuration and required output before making a selection.
Let's build your next production line
Share your container, material and production requirements. We’ll help you identify a suitable machine configuration.
Discuss your project